CZK
EURCHESTER Enclosure E5-LP
CHESTER Enclosure E5-LP
Volume discounts:
- 5% discount when purchasing 10 or more pieces
- 10% discount when purchasing 50 or more pieces
For order quantities of 200+ pcs, please contact us for an individual offer. Please note that discounts cannot be combined.
Free shipping within the Czech Republic on purchases over 120 EUR.
The CHESTER Enclosure E5-LP is a factory-prepared housing for the HARDWARIO CHESTER IoT platform, built on the Takachi WP13-18-5 industrial box. It measures 130 × 175 × 45 mm and is rated IP67, so a CHESTER mainboard together with its batteries and extension modules can be deployed outdoors, in utility shafts or in industrial plant. All openings, glands and the antenna pigtail are fitted at the factory — which is exactly what keeps the box sealed, because every hole drilled later is a hole in the ingress protection.
The E5-LP is the two-cable variant: two M8 cable glands are fitted, which suits a device with a pair of external leads — a sensor and a signal line, or two measuring cables — without paying for entries it will never use. In HARDWARIO's enclosure overview the E5 configuration is the one listed for CHESTER Scale, where load-cell cabling enters the box. Like the rest of the -LP range it has a light pipe that brings the board's status LED to the surface of the lid, and an opening for an external antenna terminated with a u.FL/SMA pigtail; the L in the ordering code denotes the light-coloured shell.
Parameters
| Base enclosure | Takachi WP13-18-5 |
| Dimensions | 130 × 175 × 45 mm |
| Ingress protection | IP67 |
| Colour | Light grey (-L in the ordering code) |
| Cable glands | 2 × M8 |
| Antenna | Opening for external antenna with u.FL/SMA pigtail |
| Light pipe | Yes — status LED brought to the lid surface |
| Mounting | Screws through the mounting holes, zip-tie holders (pole mounting possible), tape or double-sided fastener (e.g. 3M Dual-Lock) |
| Compatibility | CHESTER platform; the E5 configuration is listed for CHESTER Scale |
Safety information
- Use the accessory only as described in the documentation of the product it belongs to. Do not use a damaged accessory.
- Keep small parts out of the reach of small children.
| Manufacturing company | HARDWARIO a.s. |
|---|---|
| Address | U Jezu 525/4, 460 01 Liberec, Czech Republic |
| [email protected] |