CZK
EURCHESTER Enclosure E6-LP
CHESTER Enclosure E6-LP
Volume discounts:
- 5% discount when purchasing 10 or more pieces
- 10% discount when purchasing 50 or more pieces
For order quantities of 200+ pcs, please contact us for an individual offer. Please note that discounts cannot be combined.
Free shipping within the Czech Republic on purchases over 120 EUR.
The CHESTER Enclosure E6-LP is a factory-prepared housing for the HARDWARIO CHESTER IoT platform, built on the Takachi WP13-18-5 industrial box. It measures 130 × 175 × 45 mm and is rated IP67, so a CHESTER mainboard together with its batteries and extension modules can be deployed outdoors, in utility shafts or in industrial plant, with no further sealing work needed on site.
The E6-LP is the closed variant of the range: it has no cable glands at all. Apart from the opening for the external antenna and the light pipe, the shell is uninterrupted, which makes it the natural choice for a self-contained, battery-powered node that communicates only over the air — the fewer entry points a box has, the less there is to fail after a few winters outdoors. In HARDWARIO's enclosure overview the E6 configuration is the one listed for CHESTER Scan, Signal and Track. The antenna is terminated with a u.FL/SMA pigtail, the light pipe brings the board's status LED to the surface of the lid, and the L in the ordering code denotes the light-coloured shell.
Parameters
| Base enclosure | Takachi WP13-18-5 |
| Dimensions | 130 × 175 × 45 mm |
| Ingress protection | IP67 |
| Colour | Light grey (-L in the ordering code) |
| Cable glands | None |
| Antenna | Opening for external antenna with u.FL/SMA pigtail |
| Light pipe | Yes — status LED brought to the lid surface |
| Mounting | Screws through the mounting holes, zip-tie holders (pole mounting possible), tape or double-sided fastener (e.g. 3M Dual-Lock) |
| Compatibility | CHESTER platform; the E6 configuration is listed for CHESTER Scan, Signal and Track |