Milesight AT101 Outdoor Asset Tracker
Milesight AT101 Outdoor Asset Tracker
Free shipping from 125 EUR in the Czech Republic, 150 EUR to Slovakia and 250 EUR to all other countries we ship to (order value incl. VAT). All rates: Shipping and payment.
EU companies outside the Czech Republic with a valid VAT ID buy without VAT (reverse charge).
Price includes a WEEE recycling fee for the Czech Republic.
Price includes a WEEE recycling fee for the Czech Republic.
The Milesight AT101-868M is a rugged outdoor LoRaWAN® asset tracker combining GNSS and Wi-Fi positioning for accurate location outdoors and indoors. It adds a 3-axis accelerometer for tilt/movement detection and an NTC temperature sensor, in an IP67 / IK09 enclosure.
Four replaceable 2700 mAh Li-SOCl₂ batteries give over 15 years of operation with twice-daily reports. It supports geofencing, tilt and tamper alarms, and is configured via NFC or Bluetooth, ideal for fleet, construction, warehouse and livestock tracking.
Before you install
- Setup: via the Milesight ToolBox app (NFC).
- Power: 4× lithium batteries (ER14505) included, 15+ year life.
- Data: over LoRaWAN, needs a LoRaWAN gateway to send data (sold separately); remote monitoring via the Milesight platform is free for up to 10 devices.
Parameters
| Wireless Protocol | LoRaWAN®, Class A (OTAA/ABP) |
| Frequency | EU868, max. 16 dBm |
| Positioning | GNSS (CEP 5 m) + Wi-Fi scanning; Bluetooth 5.3 for configuration |
| Temperature | Onboard NTC, –40 °C to +125 °C; 3-axis tilt/motion detection |
| Configuration | NFC, Bluetooth 5.3, Downlink |
| Battery | 4 × 2700 mAh Li-SOCl₂ (ER14505), over 15 years |
| Enclosure | PC, IP67, impact protection IK09 |
| Operating Temperature | –30 °C to +70 °C |
| Dimensions | 110 × 70 × 30 mm |
| Mounting | Wall screw, tape or cable tie |
| Certifications | CE, FCC, RoHS |
Documentation
Safety information
- Read the manufacturer's user guide supplied with the product before installation and keep it.
- Use the product only for its intended use and within the operating conditions stated by the manufacturer. Do not use a visibly damaged product.
- Replace the batteries only with the type given in the documentation and insert them with the correct polarity (+ and −).
- Never recharge primary (non-rechargeable) cells. Do not short-circuit, open, crush or heat batteries and do not throw them into fire.
- Keep batteries out of the reach of children.
- A damaged or leaking battery can overheat or catch fire: take it out of service and do not touch leaking electrolyte.
| Manufacturing company | XIAMEN MILESIGHT IOT CO.,LTD. |
|---|---|
| Address | 401, Building No.37, Xixishanwei Road, Software Park Phase III, Torch Development Zone for High Technology Industries, Xiamen, China |
| [email protected] | |
| Responsible person in the EU | HARDWARIO a.s. |
| Address of the responsible person in the EU | U Jezu 525/4, 460 01 Liberec, Czech Republic |
| E-mail of the responsible person in the EU | [email protected] |


