Milesight WS303 Flood Detector

Milesight WS303 Flood Detector


Water leak detector with LoRaWAN®: two stainless steel probes detect water from a level of 0.5 mm, a built-in buzzer sounds on site and a remote alert is sent. IP67, up to 5 years on one CR2450 battery. More
Manufacturer: Milesight Product code: 99.25.1864.9787

Free shipping from 125 EUR in the Czech Republic, 150 EUR to Slovakia and 250 EUR to all other countries we ship to (order value incl. VAT). All rates: Shipping and payment.

EU companies outside the Czech Republic with a valid VAT ID buy without VAT (reverse charge).

58,90 EUR incl. VAT

Price includes a WEEE recycling fee for the Czech Republic.

In stock (ships within 2 business days)
Water leak detector with LoRaWAN®: two stainless steel probes detect water from a level of 0.5 mm, a built-in buzzer sounds on site and a remote alert is sent. IP67, up to 5 years on one CR2450 battery. More

Price includes a WEEE recycling fee for the Czech Republic.

Manufacturer: Milesight Product code: 99.25.1864.9787

Milesight WS303 is a water leak detector that reports a leak early, before the water does damage. Its two stainless steel probes detect water and other conductive liquids from a level of 0.5 mm. The detector then sounds its built-in buzzer and sends an alert over the LoRaWAN® network.

Through Milesight D2D it can also interact directly with other devices, without a gateway. It runs for up to 5 years on a single CR2450 battery, has an IP67 rating and measures 63 × 63 × 14 mm, so it fits in hard-to-reach places. You set it up over NFC in the Milesight ToolBox mobile app.

Before you install

  • Setup: via the Milesight ToolBox app (NFC).
  • Power: a replaceable CR2450 battery, up to 5 years of life.
  • Data: over LoRaWAN, needs a LoRaWAN gateway to send data (sold separately); remote monitoring via the Milesight platform is free for up to 10 devices. Also supports Milesight D2D for direct control without a gateway. It also sounds a local buzzer on a leak.

Parameters

Model WS303-868M
Detection Water leak (conductive liquids)
Communication Technology LoRaWAN®, Milesight D2D
Detection Sensitivity ≥ 0.5 mm water level
Power Supply 1 × 590 mAh CR2450 lithium battery
Battery Lifetime Up to 5 years (assuming one hour of leakage per week at 25 °C)
Alarm Built-in buzzer
Configuration NFC (via Milesight ToolBox mobile app)
Ingress Protection IP67
Dimensions 63 × 63 × 14 mm
Operating Temperature −10 to +60 °C
Relative Humidity 0 to 100 % (non-condensing)
Mounting 3M adhesive tape, free placement
Compatibility Standard LoRaWAN® gateways and network servers

Documentation

Safety information

  • Read the manufacturer's user guide supplied with the product before installation and keep it.
  • Use the product only for its intended use and within the operating conditions stated by the manufacturer. Do not use a visibly damaged product.
  • Replace the batteries only with the type given in the documentation and insert them with the correct polarity (+ and −).
  • Never recharge primary (non-rechargeable) cells. Do not short-circuit, open, crush or heat batteries and do not throw them into fire.
  • Keep batteries out of the reach of children.
  • A damaged or leaking battery can overheat or catch fire: take it out of service and do not touch leaking electrolyte.
Manufacturing company XIAMEN MILESIGHT IOT CO.,LTD.
Address 401, Building No.37, Xixishanwei Road, Software Park Phase III, Torch Development Zone for High Technology Industries, Xiamen, China
Email [email protected]
Responsible person in the EU HARDWARIO a.s.
Address of the responsible person in the EU U Jezu 525/4, 460 01 Liberec, Czech Republic
E-mail of the responsible person in the EU [email protected]
%s ...
%s
%image %title %code %s
%s