CZK
EURMilesight WTS506 All-in-One Weather Station
Milesight WTS506 All-in-One Weather Station
Free shipping from 125 EUR in the Czech Republic, 150 EUR to Slovakia and 250 EUR to all other countries we ship to (order value incl. VAT). All rates: Shipping and payment.
EU companies outside the Czech Republic with a valid VAT ID buy without VAT (reverse charge).
Price includes a WEEE recycling fee for the Czech Republic.
Price includes a WEEE recycling fee for the Czech Republic.
The Milesight WTS506-868M is an all-in-one solar-powered LoRaWAN® weather station measuring six atmospheric parameters (air temperature, humidity, wind speed, wind direction, barometric pressure and rainfall) using ultrasonic wind sensing and a piezoelectric rain sensor. It is housed in a waterproof, UV- and salt-spray-resistant enclosure for harsh outdoor use.
The system comprises the WTS506 sensor, the WTS Hub and a 15 W solar panel (all ship together). It stores 19,000+ records and transmits up to 15 km line of sight, suiting meteorology, smart agriculture and smart buildings. Configured via NFC or USB-C.
Before you install
- Setup: via the Milesight ToolBox app (NFC) or over USB-C.
- Power: solar panel and backup battery, ~a week without sun.
- Data: over LoRaWAN, needs a LoRaWAN gateway to send data (sold separately); remote monitoring via the Milesight platform is free for up to 10 devices.
Parameters
| Wireless Protocol | LoRaWAN®, Class A (OTAA/ABP) |
| Frequency | EU868, max. 16 dBm, up to 15 km line of sight |
| Measured Parameters | Air temp –40…+85 °C ±0.3 °C; humidity 0–100 % ±3 %; wind 0–60 m/s; direction 0–360° ±3°; pressure 500–1100 hPa; rainfall 0–1000 mm |
| Configuration | NFC via Mobile App, USB-C |
| Power | Solar 15 W + 2 × 2550 mAh rechargeable backup |
| Enclosure | Sensor aluminium alloy IP65; WTS Hub IP67 |
| Operating Temperature | Sensor –40 °C to +85 °C; hub –20 °C to +60 °C |
| Dimensions | Sensor Ø160 × 263 mm; hub 116 × 116 × 45.5 mm; panel 343 × 283 × 16.5 mm |
| Mounting | Sensor & solar panel on pole; hub by screws |
Documentation
Safety information
- Read the manufacturer's user guide supplied with the product before installation and keep it.
- Use the product only for its intended use and within the operating conditions stated by the manufacturer. Do not use a visibly damaged product.
- Replace the batteries only with the type given in the documentation and insert them with the correct polarity (+ and −).
- Never recharge primary (non-rechargeable) cells. Do not short-circuit, open, crush or heat batteries and do not throw them into fire.
- Keep batteries out of the reach of children.
- A damaged or leaking battery can overheat or catch fire: take it out of service and do not touch leaking electrolyte.
- Outdoors, fix the product securely to a mast or structure strong enough for the wind load, and protect the installation against lightning according to local regulations.
| Manufacturing company | XIAMEN MILESIGHT IOT CO.,LTD. |
|---|---|
| Address | 401, Building No.37, Xixishanwei Road, Software Park Phase III, Torch Development Zone for High Technology Industries, Xiamen, China |
| [email protected] | |
| Responsible person in the EU | HARDWARIO a.s. |
| Address of the responsible person in the EU | U Jezu 525/4, 460 01 Liberec, Czech Republic |
| E-mail of the responsible person in the EU | [email protected] |